ER-PRO1400
Congratulations on your new Energizer® ER-PRO1000 UPS Power Protection system.
This product is specifically designed for home office and workstation applications. With the newest
technology, this series can operate under a wide range of input utility power while maintaining steady output
voltage. Why is this important? Some equipment requires consistent backup power under high utility
fluctuation. Because the number of computer peripherals increase, all six outlets provide surge protection
and battery back-up to protect your printer, scanner or other peripheral devices from surges, spikes, and
electromagnetic interference.
Features:
Compact light weight design
Intelligent microprocessor control
Unparalleled communication with your computer
Provides accurate information for control and
monitoring power
Overload protection and alarm
Smart AVR for low and high input line voltage
Fax/modem surge suppression port
Site-Wiring-Fault indicator
Easy battery replacement mechanism
Your box should include the following:
UPS unit and Input Power Cord
User's Manual
Telephone Line Communication Connection Cord
Remote Monitoring Software
Item
Panel Indicator
Description
1
2
3
4
5
6
7
8
9
10
11
12
On/Off Switch
AC Normal/On
Battery Indicator
Buck Mode Indicator
Boost Mode Indicator
Overload/Abnormal Indicator
Input Circuit Breaker
or AC Fuse
Backup Power/
Surge Protection Outlets
Data Port
Network Connections
Telephone Surge
Protection Port
AC Power/Inlet
Site Wire Fault Indicator
Turns UPS system on & off
Indicate the AC is normal or
that the UPS is in battery mode
Measures and restores normal
AC voltage if it is too high
Measures and restores normal
AC voltage if it is too low
Indicates the UPS output is
overloaded or that there is
UPS failure
Protect against UPS
system overload
Provide output power to computer
device and a noise filtering function
to computer peripherals
Provides Network/DSL/Internet
Connection protection
Suppress the spike voltage
on the telephone line
Connects to input utility power
through the input power cord.
Indicate missing ground
or polarity reversed
1
2
3
4
5
SITE WIRE FAULT
AC INPUT
IN
OUT
FAX/MODEM
IN
OUT
NETWORK
DATA PORT
CIRCUIT
BREAKER
UPS OUTPUT
11
6
12
10
7
8
9
AC
BATT
BUCK
BOOST
OVERLOAD
Allows remote monitoring and
control via serial interface ports
Specifications
6~60
0:6
3 years
RJ11/RJ45
1400
910
115
60
RJ48
Stepped Sinewave
1482
Yes
<=8hrs of 90%
4
4
3 Years
14.6 x 5.9 x 8.3
CUL
6 feet
Color
Run Time
Surge Protected vs.
Battery Backup Outlets
Warranty
Internet Ready/Phone/Fax
Modem hookups
VA Rating
Watts
Input/Output Voltage
Frequency
Interface Port (USB or Serial)
Waveform Type
Joules (surge capacity)
Overload Protection
Recharge Time (typical)
Visual Indicators (lights)
Audible Indicators
Connected Equipment
Guarantee
Unit Dimensions/Weight
Compliance
Cord Length
Black
