22. POSSIBLE CHARGING PROBLEMS
PROBLEM
CAUSE
SOLUTION
Bad Battery
The Error LED may light when the
battery voltage is less than 1.5V
and more than0.5V, or the voltage
is more than 7.5V(6V mode
HFP2.0DV only) 15V (12V mode);
The battery voltage is lower than
5.5V(6V HFP2.0DV
only ),11V(12V),after charging 20
minutes;
Have the battery tested by a qualified
technician.
Battery not
accepting
a charge
·Lack of AC input power
·Faulty connections to battery
terminals
·Wrong charge voltage selection
·Battery voltage too low
·Charging a very cold battery
·Make sure that the charger is plugged into
AV outlet and the POWER LED is lit.
·Unplug the charger and check the battery
connection; ensure that there is a good
connection at the battery terminal/post
and/or vehicle chassis.
·Check that the correct charge voltage was
selected for the battery being charged.
·Ensure enough charging time was allowed
to charge battery.
·If the battery to be charged is extremely
cold(in temperatures below freezing 0
℃
), it
will not accept a high rate of charge, so the
initial charger rate will be slow. The rate of
charger will increase as the battery warms.
Never attempt to charge a frozen battery.
23. MAINTANENCE INSTRUCTIONS
This charger requires minimal maintenance. As with any appliance or tool, a few common
sense rules will prolong the life of the battery charger.
ALWAYS BE SURE THE CHARGER IS UNPLUGGED BEFORE PERFORMING ANY
MAINTENANCE OR CLEANING.
1. Store in a clean, dry place
2. Coil up the cords when not in use.
3. Clean the case and cords with a slightly damp cloth.
4. Clean any corrosion from the clamps with a solution of water and baking soda.
5. Examine the cords periodically for cracking or other damage and have them replaced if
necessary.
6.
WARNING:
All other service should be done by qualified personnel only.
Warranty and Return
Warranty by PowerBright
What does this warranty cover?
This Limited Warranty is provided by PowerBright and
covers defects in workmanship and materials in your ENC2A. This warranty period lasts for
24 months from the date of purchase at the point of sale to you, the original end user
customer. Proof of purchase is required to make warranty claims.
What will PowerBright do?
PowerBright will, at its option, repair or replace the defective
product free of charge, provided that you notify PowerBright of the product defect within the
Warranty Period, and provided that PowerBright, through inspection, establishes the
existence of such a defect and that it is covered by this Limited Warranty. PowerBright will,
at its option, use new and / or reconditioned parts in performing warranty repair and building
replacement products. PowerBright reserves the right to use parts or products of original or
improved design in the repair or replacement. If PowerBright repairs or replaces a product, its
warranty continues for the remaining portion of the original Warranty Period or 90 days from
the date of the return shipment to the customer, whichever is greater. All replaced products
and all parts removed from repaired products become the property of PowerBright.
PowerBright covers both parts and labor necessary to repair the product, and return
shipment to the customer via a PowerBright selected non-expedited surface freight within the
contiguous United States and Canada. Alaska and Hawaii are excluded. Contact
PowerBright Customer Service for details on freight policy for return shipments outside of the
contiguous United States and Canada.
How do you get service?
If your product requires troubleshooting or warranty service,
contact your dealer. If you are unable to contact your dealer, or the dealer is unable to
provide service, contact PowerBright directly at:
Toll Free: 1 866.295.6775
Website:
www.EnergizerPower.com
©2016
Energizer Energizer
and other marks, including graphics, are trademarks of
Energizer
and used
under license by PowerBright. All other trademarks, brand names or product names are the property of
their respective owners and are not affiliated with
Energizer
or Bright Manufacturing LLC.
