Energic Plus NG1, Руководство по эксплуатации

Страница: 15 / 36

15/36
5. ASSEMBLY AND INSTALLATION
5.1. Packing list
Description Amount Reference
High frequency charger 1 Check your type
plate for the
correct reference
Input cable 1 166TA3457
Output cable 1 166TA3458
Manual 1 166TA8759
5.2. Safety instructions
• The high frequency charger must be installed by qualified personnel only.
• Use correct mating receptacles. Check the earthing for electrical continuity before using
the equipment. The earthing conductor must be a size equal to or larger than the size
recommended by code or this manual.
• Always wear safety shoes and gloves when working with the high frequency charger
or battery. If you do come into contact with battery acid, follow the instructions in
chapter 11.5.
• Check that the unit’s operating voltage is identical to your local power supply.
• Check that the unit’s maximum input power is available from your power supply.
• To prevent fire or shock hazard, do not expose the unit to rain or moisture.
• The high frequency charger is not for outdoor use.
• Allow adequate air circulation.
• Do not place the unit near materials that may block the ventilation slots.
• Do not install the unit near heat sources such as radiators or air ducts.
• Do not install the unit in a place where there is direct sunlight, excessive dust, mechanical
vibration or shock.
• Make sure that the high frequency charger is installed as instructed in this manual and in
accordance with any applicable national or local norm.
• Attach the high frequency charger to a stable surface. Make sure you attach the charger
correctly by mounting the correct holes in the mounting flanges.
• In case of installation on a vehicle, it is recommended to use anti-vibration brackets.
• The high frequency charger should preferably be installed in a vertical position with the fan
facing down. A horizontal installation is allowed.
• For safety and electromagnetic compatibility, the high frequency charger has a 3-way plug
as a safety feature and only fits into a grounded socket. If you are unable to insert the plug
into the socket, you may have an older, ungrounded socket. Do not continue to use the unit
and contact an electrician to have the outlet replaced. Do not use an adapter to bypass the
grounding.
• To avoid damaging the power cord, do not put anything on it, and don’t place it where it will
be walked on. If the cord becomes damaged or frayed, refer to qualified personnel to have it
replaced immediately.
• Do not drill additional holes in the high frequency charger or attach the high frequency
charger to the wall or to your vehicle by using adhesives of any kind.