Energetiq LDLS EQ-9-HP, Руководство по эксплуатации, Страница: 15 / 37

DOC-8240 Rev. 3 EQ-9-HP Operation Manual 11
Power Supply Controller
The Power Supply Controller contains:
•
Laser power supply
•
Thermo-electric cooler control system for laser
•
Control electronics
•
Status indicator LEDs
•
Interface connectors
External features (refer to Figure 3):
Status Indicator LEDs
These five LEDs indicate the system status. The function of these indicators is shown below
in Table 2 .
LED Label Meaning (when lit)
POWER ON DC power is connected to the EQ-9-HP Power Supply Controller
LAMP ON UV Light is on
LASER ON Laser power is ON and laser light is being produced within the Lamp
House
CONTROLLER FAULT One of the following has occurred in the Power Supply Controller:
1. External interlock open
2. Controller internal temperature too high
3. Laser power not reaching setpoint
4. Laser Temperature Fault
LAMP MODULE FAULT One of the following has occurred in the Lamp House module:
1. Control Cable not connected properly
2. Lamphouse internal termperature too high
3. Ignition Failure
Table 2: Status Indicator LED Functions