Energetiq EQ-99X LDLS, Руководство по эксплуатации и обслуживанию

Страница: 16 / 39

10 EQ-99X Operation Manual Rev. 2
Utility Requirements

Electrical: 12VDC, 140W

Cooling: natural convection and internal fan, no auxiliary cooling necessary

Purge gas (optional): clean dry nitrogen, filtered to 5um 20 psig (0.14 MPa) supply
pressure
Remote Interface
Digital Inputs

Type: Optocoupler LED

Logic: Active High

Input voltage: 5VDC

Input current: 8mA
Digital Outputs

Type: Open collector to ground (digital common)

Logic: Active Low

Voltage: 30VDC max.

Sink current: 30mA max.
User Power

Voltage: 5VDC, referenced to digital common

Current: 50mA maximum
Environmental Requirements
Operating

Ambient temperature: 15–35°C

Relative Humidity: non-condensing, 80% max. for temperatures up to 31°C,
decreasing linearly to 50% max. at 40°C.

Pollution Degree 2 (normally only non-conductive pollution; occasional,
temporary condensation possible)

Installation Category II

Indoor use only
Transport

Temperature: -5–95°C

Relative Humidity: non-condensing, 95% max.