background image

This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio frequency energy and, if not installed and 

used in accordance with the instructions, may cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on. The 

user is encouraged to try to correct the interference by one or more of the following 

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

3

2

-

-

-

-

Please read and understand this entire manual before attempting to assemble, operate or 

install the product. Failure to do so could lead to electric shock, fire or other injuries that 

could be hazardous or even fatal.

• 

Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or 

turn off the circuit breaker.

• 

Changes or modifications not expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment.

• 

This product must be installed in accordance with the applicable installation code by a 

person familiar with the construction and operation of the product and the hazards involved.

CAUTION:  

• 

This product can be dimmed using a triac dimming system only.

• 

Suitable for wet locations.

• 

Wall mount only.

NOTICE

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions: (1) This device may not cause harmful interference, and (2) this device must 

accept any interference received, including interference that may cause undesired operation.

Before beginning assembly of product, make sure all parts are present. Compare parts with 

package contents list and hardware contents list. If any part is missing or damaged, do not 

attempt to assemble the product.

Estimated Assembly Time:

 20 minutes.

Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, safety 

glasses, power drill and bits.

To ensure a safe and proper installation, ensure that power is disconnected to the supply wires.

1. Remove the two screws on both sides of the fixture to 

separate the front lens cover (A) and back plate (C).  

www.energeticlighting.com

www.energeticlighting.com

Part

Item Name

Qty.

A

Lens Front Cover

1

B

Reflector

1

C

Back Plate

1

D

Silicone Gasket

1

PACKAGE CONTENTS

SAFETY INFORMATION

SAFETY INFORMATION

HARDWARE CONTENTS

PREPARATION

INSTALLATION INSTRUCTIONS

Fig. 1

AA

Wire Nuts

(Qty. 2 preassembled)

Qty. 5

B

C

D

A

C

A

Junction Box

Screws

Qty. 4

BB

Содержание E1WPM Series

Страница 1: ...llation Instructions Model E1WPM series Questions problems missing parts Before returning to your retailer call our customer service department at 1 866 492 6566 Item Number Purchase Date ATTACH YOUR RECEIPT HERE www energeticlighting com L I G H T I N G ...

Страница 2: ... responsible for compliance could void the user s authority to operate the equipment This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved CAUTION This product can be dimmed using a triac dimming system only Suitable for wet locations Wall mount only NOTICE This device comp...

Страница 3: ... is no ground supply wire stop installation and consult a qualified electrician Once wire connections are made secure each with a wire nut AA Fig 5 6 Secure the fixture to the junction box using the necessary junction box screws BB provided to ensure proper mounting and seal around the junction box Fig 6 7 Retrieve reflector B and the thre screws previously removed in step 3 and re install the ref...

Страница 4: ...ot sprayed directly onto the fixture itself INSTALLATION INSTRUCTIONS CARE AND MAINTENANCE TROUBLESHOOTING WARRANTY Problem Possible Solution Corrective Action Fixture does not light Circuit breaker trips when light is turned on 1 Power is off 2 Incorrect wire connection 3 Defective wall switch Crossed wires or power wire is grounded out Verify wires are correctly connected 1 Check circuit breaker...

Отзывы: