04
05
ENB522TCB by
Energer
ENB522TCB by
Energer
Technical and legal
information
Your product
Your product
GB
IE
Getting started...
GB
IE
Getting started...
Technical data
7. Extension table
8. Fixing knob
9. Fixing knob
5. On/Off switch
6. Carry handle
1. Parallel cutting guide
2. Angle cutting guide
3. Wheel guard
4. Water reservoir lid
1
2
3
4
5
6
7
> Voltage/Frequency: 230-240V~ 50Hz
> Motor Power: 450W, S2:30min
> No-Load Speed: 5400/min
Blade size: ø110mm (D) - Bore ø22.23mm
Max. Cutting Thickness: To 90°:23mm – to 45°:16mm
Protection Degree (IP): IP23
A weighted sound pressure KpA: 93dB(A)
Table size (Unextended ~ Extended): 332 ~ 395mm (L) x 305mm (W)
Weight: 3.7kg
>
>
>
>
> Uncertainty KpA: 3dB
>
>
A load factor of S2 30 min ( temporary duty ) means that you may operate
the motor continuously at its nominal power level (450W) for no longer than
the time stipulated on the specifications label (30minutes ON period). If you
fail to observe this time limit the motor will overheat. During the OFF period
the motor will cool again to its starting temperature.
> A weighted sound power KwA: 106dB(A)
> Uncertainty KwA: 3dB
８
９
> Vibration level: 2.5 m/s
2
> Uncertainty K: 1.5m/s
2
Noise and Vibration Data
The declared vibration total value has been measured in accordance with a
standard test method and may be used for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment
of exposure.WARNING: The vibration emission during actual use of the power
tool can differ from the declared total value depending on the ways in which the
tool is used. The need to identify safety measures and to protect the operator
are based on an estimation of exposure in the actual conditions of use (taking
account of all parts of the operating cycle, such as the times the tool is switched
off, when it is running idle, in addition to trigger time).
