ENER314
R
ASPBERRY
P
I
RF-
TRANSMITTER BOARD
1 of 6
Introduction
The RF transmitter add-on board can be used with the R-PI to control up to 4 simple Energenie radio
controlled sockets independently using a small software program. We have written a simple program in
Python to allow us to switch the sockets on and off with a single keyboard press.
The add-on board connects to the row of pins called the GPIO which can be controlled as either input or
output lines under your software control.
Installing the board
Fig. 1: R-Pi with piggy back RF-transmitter board
Install the board on to the row of pins as show in the picture and connect your Raspberry-Pi as normal
to a monitor, mouse, keyboard and USB power supply.
