10
EGM-PWM-LAN ENERGY METER WITH LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
3.3. IP configuration
The utility
LAN Find
(see Figure #4 below) will run automatically
during the software installation but it can also be started from
Start/All
Programs/Gembird/Power Manager
. The IP range where you would like
to search for EGM-PWM-LAN will be set automatically according to the IP
settings of your LAN adapter but can be changed manually in the
Adapter
subnet
fields. Now press the
Search
button.
NOTE:
only EGM-PWM-LAN within a local subnet can be found. If
your computer LAN adapter is not in the (default) subnet of EGM-PWM-
LAN (as might probably be the case if you chose
option B
section 3.1)
you will have to change its IP address manually to be able to find EGM-
PWM-LAN. For example if you wish to find EGM-PWM-LAN (with the
default IP 192.168.0.254), the IP address of your computer should be set
as 192.168.0.
XXX
(where
XXX
stands for any digit, for example 1) and
the subnet mask should be 255.255.255.0.
After the searching the IP addresses of the found EGM-PWM-LAN
devices will appear in the list box. Select EGM-PWM-LAN which you
want to access, and press the
Open
button (see Figure #4 below).