Energate Z100 P2 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 64

Energate Z100 P2 Скачать руководство пользователя страница 16

Heating and Cooling Modes

The thermostat is pre-set for heating operation (HEAT) but, as explained when describing the
HOME SCREEN, you can manually (by pressing the LEFT TAB) change the thermostat mode
between AUTO, HEAT, COOL, OFF, and EMERG.

The available options for the thermostat mode will depend on the type of heating or cooling
equipment at your home.

AUTO:

The thermostat automatically selects heating or cooling based on the indoor

temperature.

HEAT:

The thermostat controls only the heating system.

COOL:

The thermostat controls only the cooling system.

OFF:

Heating and cooling systems are off.

EMERG

:

This setting only applies to heat pumps with auxiliary heat. The thermostat only
controls the Emergency (Auxiliary) heat, leaving the heat pump’s compressor
locked out. Use this setting only when you suspect the heat pump is out of service
or the outdoor conditions may lead to an inefficient operation of the heat pump.

Fan Modes

You can manually change the fan mode between AUTO and ON, by pressing the RIGHT TAB.

AUTO:

The fan runs only when the heating, cooling, or emergency systems are on. As

described in detail in the Installation section of this manual, for conventional
systems, under EQUIPMENT SETTINGS, with FAN ON IN HEAT set to NO, the fan
is not controlled by the thermostat, but by the furnace.

ON:

The fan runs continuously.

Page 16

«
...
14
15
16
17
18
...
»

Содержание Z100 P2

































































Отзывы:

Нет отзывов