LiFePO4 BATTERY CHARGER C14-10-AY and C14-10-AY-SB50 Rev.0
2.
TECHNICAL FEATURES
2.1.
NORMATIVE REFERENCES
ENERGA battery charger is built in compliance with the following laws :
EN61000-3-2; EN61000-4-2; EN61000-4-4; EN61000-4-5; EN61000-4-11; 61000-4-8; CEI EN60950-1
3.
CONNECTION AND FUNCTIONING
After the unpacking, check the battery charger in order to exclude possible mechanical damages. Don’t use the
battery charger if damaged. If you are not sure, pls. contact your supplier.
Verify the correct polarity of the whole plant that you will connect. The polarity is indicated on the connector of
the battery through the following symbols :
+
positive
-
negative
The battery charger
C14-10-AY
is quipped with crocodile clip connectors of the following colours :
•
RED
Positive polarity (+)
•
BLACK
Negative polarity (-)
Connect the battery charger before to the battery and only after this operation, connect it to the electric socket.
Connect the battery charger RED connector to the positive pole (+) of the battery and the other connector to the
negative pole (-).
The battery charger
C14-10-K-SB50
is quipped with a red Anderson Connector (SB50)
Meaning of the LEDs:
LED 1 - RED :
BATTERY CHARGER CONNECTED TO THE MAINS POWER
LDE 2 - RED:
ON CHARGE
LDE 2 - GREEN :
THE CHARGE IS COMPLETE
C14-10-AY
C14-10-AY-SB50
Input voltage
210 ÷ 240 Vac
210 ÷ 240 Vac
Max input current
1,5 A
1,5 A
Input frequency
50 / 60 Hz
50 / 60 Hz
Output voltage
14,5 V
14,5 V
Charge current
10 A
10 A
Max environmental temperature
temperaturetemperature
40°C
40°C
Weight ( approx. )
1000 gr
1000 gr
Dimensions ( A x B x H mm )
175x90x50
175x90x50
Battery connection
Crocodile clips
Anderson SB50
