Ener-G+ HIB-2000, Руководство оператора

Страница: 4 / 22

3
IMPORTANT SAFETY INSTRUCTIONS
10.A heater contains components that become hot and produce electrical sparks. Do
not operate it in areas where gasoline, paint, or flammable liquids are used or
stored.
11.This unit must be permanently secured to one of the bathroom walls and must only
be used to heat the room where it is installed.
12.Make sure the main power supply complies with the rating plate: 240 V AC, 60 Hz.
13.Never let children play with the unit. Caution! When the unit is on, the air outlet grille
can reach very high temperatures (more than 80 °C).
14.Never use this unit within arm’s reach while in the shower, the bathtub or near a
sink. Never let water enter the bathroom fan heater which will lead to electric shock!
15.Never secure the unit to walls made of synthetic materials.
16.This heater must always be installed vertically on a wall.
SPECIFICATIONS
240V AC, 60Hz
8.14 lbs (3.7 kg)
13.78” x 22.6” x 6.7”
(35 x 57.5 x17 cm)
This fan heater is intended for permanent wall-mounting with the provided screws.
The heater has a thermal cut-off protection. If the thermal cut-off protection trips, switch
off the power. The unit should reset automatically after 10 minutes. If the thermal cut-off
protection trips again, determine the reason for overheating.
Model HIB-2000
Voltage
Watts
Amps
1 200/2 000 W
8.3 Amp
Net Weight
Dimensions
(W x H x D)