8
Control buttons on the remote control
Standby / On
Turn on the monitor or switch to standby mode.
Mute
Turn OFF/ON the sound.
Menu selection
Select menu item
Volume
Adjust the volume
Menu selection
Select menu item
Menu
Open or close the settings menu.
Source
Open the source menu and select in the following
order: VGA BNC1 HDMI DVI DP
Image
To switch between the available video images
Inserting the batteries
Open the battery compartment on the back of the remote control.
Insert a CR2032 3V battery with the correct polarity into the compart-
ment. Please use only new batteries.
Close the compartment again.
Hold the remote control in the direction of the infrared sensor. The
distance to the monitor must not exceed 7 meters.
i
Note:
Please do not throw the used batteries into the household waste, but dispose of
them in an environmentally friendly manner at the appropriate collection points.
