3
• NIGHT: Use the NIGHT mode if you want to set the white balance differently according to the ambient lumi-
nance. If the NIGHT mode is set to OFF, the white balance will allways operate as set in DAY mode: If not to OFF,
the camera will switch to as set in DAY/NIGHT mode according to the brightness. In NIGHT mode, you can set
the values of RED, BLUE and BRIGHTNESS.
The screen will be displayed in colours according to your settings.
NOTE: You can set the values of R-GAIN and B-GAIN only in AWC mode.
For adjusting the white balance, the following 5 modes are provided:
ATW (Auto Tracking White Balance mode ): The camera can automatically adjust the colour temperature in
real time, according to the ambient conditions.
The colour temperature ranges from approx. 500K to 9500K.
ATW: The colour temperature ranges from approx. 800K to 0500K.
AWC (Auto White Balance Control): If you press the SETUP key in the appropriate item position, Auto White
Balance will perform once.
300K: Set colour temperature to 300K.
5600K: Set colour temperature to 5600K.
RED: Adjusts the strength of the red colour.
BLUE: Adjusts the strength of the blue colour.
R-GAIN / B-GAIN: Enables you to set the current colour temperature manually.
BRIGHTNESS: Selects a brightness level in switching from setting in DAY mode to setting in NIGHT mode.
• DIGITAL ZOOM: ON / OFF
You can set the digital zoom factor and position. When the zoom factor and position are defined, the digital zoom
function will operate.
• LOCATION: If you press the SETUP key in the condition where the image is enlarged as much as the ratio
setting, you can watch an invisible area of the effective screen as well using the direction keys ( , ).
NOTE: he DIGITAL ZOOM function enlarges the pixel itself, which can cause deterioration of the quality.
• DETAIL: 0~3
Controls the horizontal or vertical distinction.
• V-SYNC: INT
This camera model is fixed to „INT” (Internal syncronization).
• AGC COLOR SUP: LOW / MID / HIGH
Adjust the colour scheme according to the AGC value.
• REVERSE: OFF / H / V / H.V
Mirrors video signals horizontally, vertically, or both.
• POSI / NEGA: + / –
Output as it is or mirror the video brightness signal.
• PIP: OFF / ON
Displays a sub image together with the main image on the same screen using the picture in picture function.
Содержание VKCD-1331
Страница 39: ...39 ...
