7
3.4.2 Instillation 2 (Using the Conduit Knockout punched with Mount Base)
A. Drill the mounting location, using the template sheet (or the bottom of the mount base) as a template
B. Insert the plastic anchors into the hole which has just drilled.
C. Connect BNC cable and communication lines.
D. Fit the screw holes of the mount base into the plastic anchors.
E. Remove the conduit knockout punched for the cable entry.
F. Screw up the M6 torx screws (T-0).
G. Adjust the camera suitably using the pan & tilt function, and fix the camera using the socket set screw, hexagon wrench.
Mount base
Wall
Torx screws (T-0)
M6.0 x 35.0 (4x)
Socket set screw
M5.0, L=5.0mm
Hexagon wrench
A conduit knockout punched for
the cable entry
Cable
Plastic anchors (4x)