Eneo VKC-1395, Полное руководство, Страница: 18 / 24

2 (GND)
1
&21752/$1'&211(&7,216'$< 1,*+7
,1$/$502877(50,1$/6
Terminal Block
1-1. DAY&NIGHT EXTERNAL INPUT (1pin)
Switches the cameras D/N mode to either Day or Night based on the input status. Refer to the
diagram below. The cameras D/N mode must be set to EXT for this to function.
Open contact: DAY
Close contact: NIGHT
1-2. Common/Ground – Used for D/N and Alarm connections
1-3. ALARM OUT - TTL level
Motion detection signals are output through this port. Active state is Low.(GND)
Normal : Open Collector, ALARM : Low.(GND)
1-4/5. CAMERA CONTROL
2 POWER INPUT TERMINAL
~ AC 24V ~
In DC power, use the Adapter mode than DC 12V 500mA Capacity.
3 VIDEO OUT CONNECTOR
BNC : This BNC connector provides a 1.0Vp-p/75 ohms composite video Signal.
(Option)
GND
18