Eneo VKC-1360, Инструкция по установке и эксплуатации

Страница: 34 / 44

34
5) SYNC Select Internal or Line Lock mode.
INT
This mode is necessary for using the internal synchronization.
L/L This mode is necessary for the operation of multi camera because it
synchronizes the camera phase by using the external signal (AC Signal).
PHASE Sync phase is adjustable in line lock mode.
6) LANGUAGE You can change the OSD language using the LEFT/RIGHT Setup switch.
5.8 ADJUST
1) SHARPNESS
Can be adjusted SHARPNESS of outlines. (0~3)
2) BLUE Adjust B-GAIN value. (0~00)
3) RED Adjust R-GAIN value. (0~00)
5.9 RESET
1) FACTORY
Returns to the level which was set by the manufacturer for
5.10 EXIT
1) EXIT Saves all the setting menus and then exits.