7
5.2.2 Installation on Ceiling
It is available for the upside down installation on the ceiling by re-arranging the camera module inside the
housing to be turned 180
°.
The modification for upside down mounting must be carried out by authorized personnel.
5.2.3 NOTE – Silica gel bag
As it is not always possible to avoid a situation where a certain amount of moisture remains in the opened casing, we
recommend using the enclosed bag of silica gel in such cases. It must be ensured that the gel is used appropriately, i.e.
opening the protective film too soon can lead to the silica gel becoming saturated in a very short period of time, thereby
making it ineffective.
1. Before inserting the silica gel pack, please remove the aluminum protective sleeve around the pack, as the silica gel is
only effective without the aluminum protective sleeve.
2. Insert the pack between the back of the casing and the camera holder.
3. The silica gel retains the residual moisture that accumulated in the casing during assembly in a moist climate.
5.3 Setup of the Image Sector
• Pull off the camera housing
.
• Power
up the camera and connect a monitor.
•
Loosen
ⓒ
Zoom adjustment knob and adjust the zoom setting.
•
Loosen
ⓑ
Focus is adjustment knob and adjust the focus.
•
Tighten both locking screws
ⓑ
+
ⓒ
when adjustment is done. Close the housing.
NOTE:
For a precise adjustment of cameras installed outside it is recommended to place a ND (Neutral Density) filter in
front of the lens while settings are done. This opens up the iris and allows a setting which is constant at changing
light conditions due to the narrower depth of field.
6. SETUP Menu
6.1 In the menu
Setup menu can be accessed and controlled by OSD control joy stick on the side of camera.
Five commands are available with the joy stick.
In the menu, use
▲
,
▼
to move menu,
◀
,
▶
to change the settings and press
●
to select or enter.
Joy stick
VIDEO
SUB-OUT
connector
SYMBOL descriptions for joystick operation;
-
▲
,
▼
,
◀
,
▶
denotes the directions of
Joystick lever operation.
-
●
denotes Pressing straight down of
Joystick lever
