FULL-HD MEGA-PIXEL CAMERA
21
Operating Instructions
: Detects and compensates the white pixels which become defective.
Once CALIBRATE is selected, the pixel calibration is initiated with lens closed
and can’t cancel.
8-4.
PIXEL DEFECT
(default: OFF)
• THRESHOLD : Defines the level of detection and low value detects more pixels.
Be sure to set the value so that the pixels are uniformly blinking over the entire
screen. Too low value will get the bad results because too many pixels are
detected as the bad pixels and the maximum number of pixels for compensation
will be filled by the upper area.
• STAY ZOOMING : Sets the duration time for zooming by Motion.
(See page No.25 “SMART MOTION ZOOM”)
: MOTION can detect the changes in the motion window and displays the results
in blocks and/or a text message.
7-3.
MOTION
(default: OFF)
: Set the direction of video by MIRROR/FLIP before SMART MOTION ZOOM
setting. Otherwise ZOOM TARGET could be different from your intention.
CAUTION
NOTICE
: SMART MOTION ZOOM does not work at low sensitivity and B/W mode.
※
SMART MOTION ZOOM doesn’t work at low light condition and BW.
• SENSITIVITY : Adjusts the detection sensitivity for motion.
High value increases the sensitivity to detect the small motion easily. Too low
sensitivity will cause the erratic detection by the tree leaves or the light level
changes.
• H-POS,V-POS, H-SIZE and V-SIZE :
Adjust the size and position of the detection window.
• BLOCK DISP : ON enables to display the blocks for the detected area.
• MOTION OSD : ON enables to display a text message, MOVING !!!,
• SMART MOTION ZOOM : ON enables to Automatic Zoom IN/OUT when motion
is detected and also enables MOTION OSD to ON.
Area to be zoomed in by SMART MOTION ZOOM can be set at SPECIAL>
MOTION> SMART MOTION ZOOM. Adjusting
◀
,
▶
(Joystick) for ZOOM TARGET
varies the viewing angle to be zoomed when the motion
occurs.Set the video left and right and/or up and down by MIRROR/FLIP.
