Eneo PXD-2080Z03 B, Полное руководство

Страница: 10 / 32

5.3 Flush mount
⑥
Mount screws
Dome base
assembly
Quick installation guides;
1. Locate the mounting template at the installation position
and drill the ceiling or wall if needed.
2. Open Dome bubble assembly by loosening
ⓘ
Ring cover
fixing screws(x3)
CAUTION
Extreme care should be taken NOT to scratch the dome
surfaces and to protect it from dirt or dust at any time.
3. Place Dome base assembly on pre-drilled position and fix it
through
ⓕ
mount holes(x3) by using
⑥
Mount screws.
(Use three screws only out of
⑥
Mount screws(4x))
4. Route the power/ video cable to the connecting place.
CAUTION
Care should be taken the cable is NOT to be damaged,
kinked or exposed in the hazardous area.
5. Set the camera’s angle (Pan, Tilt, inclination)
6. Adjust ZOOM/FOCUS by OSD menu or manual
7. Put Dome bubble assembly over Dome camera assembly and
tighten
ⓗ
Ring cover fixing screws(x3) by using
③
L-shape hex
wrench
CAUTION
Tighten enough
ⓗ
Ring cover fixing screws(x3) so that
there should be NO gap between
ⓔ
Lens and
ⓖ
Clear bubble to avoid the light inflow from IR LEDs.
Ceiling or wall
Dome bubble
assembly
L-Wrench
9