Eneo PXB-2080MIR B, Быстрое руководство по установке

Страница: 21 / 139

Operating Instructions
21
FULL-HD NETWORK CAMERA
Advanced Camera OSD menu
Click ‘ADVANCED CAMERA MENU’ bar at CAMERA CONTROL menu to activate the
camera OSD menu.
Click Up/Down/Left/Right bars to navigate or change the parameters.
These options have been pre-configured at the factory for optimal performance.
MENU
V
3.07
1. PRIVACY
2. MOTION
3. TITLE SET
4. SMART IR
5. POINTING ZOOM
6. HLC LEVEL
7. BLC LEVEL
8. FOCUS ADJ.
9. EXIT
↵
OFF
↵
↵
|::::::::::::::|
0
10
ON
SET
|:::::::|:::
:::|
↵
SAVE&EXIT ↵
• ZONE NUMBER – Set a number to select a privacy zone from 1~10.
• ZONE DISP – ON enables a relevant privacy zone.
• H-POS, V-POS, H-SIZE and V-SIZE – Adjust the size and position of zone.
• COLOR – Select the color used for masking the zone form eight colors.
• TRANSPARENCY – Defines the transparency for the mask zone.
10 Privacy zones which can be enabled individually by ZONE DISP are available to
mask the video.
1. PRIVACY (default: OFF)
• SENSITIVITY – Adjusts the detection sensitivity for motion. High value increases the
sensitivity to detect the small motion easily. Too high sensitivity will cause the erratic
detection by the tree leaves or the light level changes and too low setting will fail in
detecting the motion
• H-POS,V-POS, H-SIZE,V-SIZE - Adjust the size and position of the detection window
• BLOCK DISP – ON enables to display the blocks for the detected area.
• MOTION OSD – ON enables to display a text message, MOVING !!!
• SMART MOTION ZOOM– ON enables to Automatic Zoom IN/OUT when motion is
detected and also enables MOTION OSD to ON.
MOTION can detect the changes in the motion window and displays the results in
blocks and/or a text message
2. MOTION (default: OFF)