69
Event Out – SD Record
When the network camera detects an event such as Alarm or Motion,
it records the stream1 according to user
settings.
Figure 39. Event / Event Out – SD Record
Record Setting:
Click the Enable record checkbox to activate SD recording function.
Enable overwrite mode:
Click checkbox to overwrite the SD card
Pre-event:
Enter pre-event time value for SD pre-recording.
Post-event:
Enter post-event time value for SD post-recording.
SD Format:
Shows the SD card status and supports format functionality. If the SD card is not
in being, the camera shows “No SD card,” whereas if the camera detects SD card, it shows “New
(need format)”. Every time the new SD card inserted, user needs to format the SD card before
recording. If the camera is ready to record, it shows “mount” message.
SD State:
Shows the current SD card status in the camera such as No SD card, New(need format),
formatting or mount.
SD Format:
Click the SD Format dialog box to format SD card.
SD Information:
Shows current SD card information.
