Eneo MSM-42F0028M0A, Быстрое руководство по установке

Страница: 5 / 23

9 8
EN
Operating instructions
Using OSD controller
Setup menu can be accessed and controlled by OSD controller.
Description of the OSD control operation
1. SET Key (
●
) : Access to the menu or enter the setting. To enter the main menu,
press the Set Key down.
2. UP/DOWN Key (
▲
/
▼
) : Choose the desired sub-menu and to move the cursor up or
down.
3. LEFT/RIGHT Key (
◄
/
►
) : Set up the value of the selected menu. Used to adjust the
desired menu selection and to move the cursor left or right.
4. ‘
☟
’ denotes the long press down straightly for about 2 seconds
i
If CVBS video is enabled through ANALOG OUT0 or Sub-out port, WDR and 3D-NR
functions are disabled in all video outputs. It should be considered when installer adjusts
the video with installation monitor via CVBS video signal.
OSD menu startup
Press the ‘OSD menu SET key’ down to access the setup menu mode.
• EXIT : Enters ‘EXIT’ menu with save current setting or without save.
• RETURN : Returns to the previous menu.
/'078::
1((
%1.14
/+&&.'
1((
1((
# 5;56'/
$ ':+6 5#8'
/#07#.
.'05
(1%75#5V
':21574'
$#%-.+)*6
&#;0+)*6
%1.14
&04
+/#)'
/16+10
OSD menu table
MENU SUB MENU CONFIGURATION
LENS
DC MODE (INDOOOR, OUTDOOR, DEBLUR)
MANUAL
FOCUS Ast. ON, OFF
EXPOSURE
BRIGHTNESS 0~20
SHUTTER
AUTO
MANUAL
(SPEED)
1/25, 1/50, 1/100, 1/200, 1/400, 1/800, 1/1600, 1/3200, 1/6400,
1/12800, 1/25600
FLICKERLESS
SENS-UP OFF, x2, x4, x8, x16, x32
AGC 0~10
BACKLIGHT
OFF
HLC
LEVEL, COLOR
BLC H/V-POS, H/V-SIZE
WDR
MODE
ROI
WINDOW ZONE/USE, H/V-POS,
H/V-SIZE
NORMAL
TARGET-BRT LOW, MIDDLE, HIGH
WEIGHT LOW, MIDDLE, HIGH
DAY & NIGHT
EXTERN SMART IR, ANTI-SAT., D>N THRES, N>D THRES, DELAY
AUTO SMART IR, ANTI-SAT., AGC THRES, AGC MARGIN, DELAY
COLOR
B&W
SMART IR, ANTI-SAT.
COLOR
AWB AUTO, AUTOext, PRESET, MANUAL (C-TEMP, R/B-GAIN)
COLOR GAIN 0~20
3D-NR OFF, LOW, MIDDLE, HIGH
IMAGE
SHARPNESS
MAIN OUTPUT ANALOG OUT0, ANALOG OUT1, SDI OUTPUT
ANALOG OUT0 TVI MODE, AHD MODE, CVBS, CVI MODE
ANALOG OUT1 CVBS, TVI MODE, OFF
SDI OUTPUT HD-SDI, EX-SDI 1.0, EX-SDI 2.0, OFF
GAMMA 0.45, 0.55, 0.65, 0.75
MIRROR OFF, ON
FLIP OFF, ON
D-WDR OFF, LOW, MIDDLE, HIGH
DEFOG OFF, ON
MODE (AUTO, MANUAL)
LEVEL (LOW, MIDDLE, HIGH)
PRIVACY OFF, ON
ZONE NUM, ZONE DISP, H/V-POS, H/VSIZE, Y
LEVEL, CB/CR LEVEL, TRANS