ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
13
OSD Control &
Video format Joystick
Video format
DIP Switch
Video sub-out
Connector
Using OSD Control Controller
Setup menu can be accessed and controlled by OSD control joy stick on the
gimbal of the camera unit. Five commands are available with the joy stick.
The design of OSD could be different according to the Model.
1] SET Key (
●
) : Access to the menu or enter the setting.
To enter the main menu, press the Set Key down.
2] UP/DOWN Key (
▲/▼
) : Choose the desired sub-menu and to move
the cursor up or down.
3] LEFT/RIGHT Key (
◄/►)
: Set up the value of the selected menu. Used
to adjust the desired menu selection and to move the cursor left or right.
■
Description of the OSD control operation
If OSD menu is adjusted in specific video format, adjusted value is applied to
only related video format. For example, if the menu is adjusted in CVBS mode,
adjusted value is applied to CVBS video only.
NOTE
Using Video Format Switch
The DIP SWITCH setting has first priority.
If the switch is set to CVBS, only CVBS output is available for both main video
output and sub-out. Please be advised that camera generates only one video
output for both main video output and sub-out. It takes 3~5 seconds when video
format is changing. The default DIP SWITCH setting is CVBS mode.
■
DIP SWITCH setting
CVBS
HD
