Eneo IPD-52F0028MAA, Руководство пользователя

Страница: 49 / 63

50
MEGA-PIXEL NETWORK CAMERA
Full Menu Setup
2-4-3. Network
> IPv6 ADDRESS : Mark ENABLE check box to use IPv6 address and click SAVE button,
then new IPv6 address will be obtained.
> DNS :
• OBTAIN DNS ADDRESS VIA DHCP SERVER : Obtains the DNS address automatically
assigned by DHCP server.
• USE THE FOLLOWING DNS ADDRESS : Requires manual input as per below.
- DOMAIN NAME : Enter the domain for the host name
- PRIMARY DNS SERVER : Enter the IP address of the primary DNS server.
- SECONDARY DNS SERVER : Enter the IP address of the secondary DNS server.
> HOSTNAME : This camera can be accessed using a host name instead of an IP address.
The host name is usually the same as the assigned DNS name.
●
TCP/IP
> IPv4 ADDRESS :
• OBTAIN IP ADRESS VIA DHCP : Gets the IP address assigned by the DHCP
(Dynamic Host Configuration Protocol) server.
• STATUS : ‘Allocated’ shows that the IP address is obtained from the DHCP.
• IP ADDRESS, SUBNET MASK, GATEWAY : Displays the current IP address which
is obtained from the DHCP.
• USE THE FOLLOWING ADDRESS : Requires the input of a static IP address manually.