Eneo INR-18N040005A, Быстрое руководство по установке, Страница: 9 / 40

9
EN
Network Configuration
If you connect to a router allows to use DHCP, please check the
DHCP
box. The router
will assign automatically all the network parameters for your NVR. Unless the network is
manually addressed below parameters:
IP Address: The IP address identifies the NVR in the network. It consists of four groups of
numbers between 0 to 255, separated by periods. For example, “192.168.001.100”.
Subnet Mask: Subnet mask is a network parameter which defines a range of IP address-
es that can be used in a network. If IP address is like a street where you live then subnet
mask is like a neighborhood. The subnet address also consists of four groups of numbers,
separated by periods. For example, “255.255.000.000”.
Gateway: This address allows the NVR to access the Internet. The format of the Gateway
address is the same as the IP Address. For example, “192.168.001.001”.
DNS1/DNS2:
DNS1 is the primary DNS server and DNS2 is a backup DNS server.
Usually should be enough just to enter the DNS1 server address.
Port
Web Port: This is the port that you will use to log in remotely to the NVR (e.g. using the
Web Client). If the default port 80 is already taken by other applications, please change it.
Client Port: This is the port that the NVR will use to send information through (e.g. using
the mobile app). If the default port 9000 is already taken by other applications, please
change it.