36
Full Menu Setup
> JPEG SETTING : Configures JPEG for the FTP server.
• PRE-EVENT : Sets the time & the frame rate for JPEG images to be sent to FTP
before the event.
• POST-EVENT : Sets the time & the frame rate for JPEG images to be sent to FTP
after the event.
• PREFIX FILE NAME : Input the prefix for JPEG image file names to be sent to FTP.
• ADDITIONAL SUFFIX : Selects the suffix for JPEG image file names to be added
after the file name. Selecting NONE will overwrite the previous file and thus DATE
&TIME is most preferable.
• REMOTE DIRECTORY: Specify the path to the directory where the uploaded
images will be stored. If this directory doesn’t already exist on the FTP server, an
error message shows up when uploading.
• USER NAME: Enter the user name provided by the network administrator.
• ANONYMOUS LOGIN: Mark ANONYMOUS LOGIN checkbox if anyone is permitted
to access the FTP server.
• PASSWORD: Enter the password provided by the network administrator.
> Mark ENABLE checkbox to set the FTP server.
• SERVER : Enter the IP address or host name of the specific FTP server.
• PASSIVE MODE : Under normal circumstances the network camera simply requests
the target FTP server to open the data connection. Checking this box issues a PASV
command to the FTP server and establishes a passive FTP connection; whereby
the network camera actively initiates both the FTP control and data connections to
the target server. This is normally desirable if there is a firewall between the network
camera and the target FTP server.
• PORT : Enter the port number used by the FTP server. The port number can be
adjusted in the range 1-65535. The default setting is 21.
