44
Full Menu Setup
Used to trigger the event when the camera gets rebooted.
> Mark ENABLE checkbox to activate the system event.
> DWELL TIME : Sets the time for the alarm once the system event is detected.
> Mark ENABLE checkbox to enable the manual trigger icons on the live view menu.
> DWELL TIME : Sets the time for the event once triggered by the manual trigger on
the live view menu.
●
System
The camera can detect severe changes in the image caused by actions such as
repositioning the camera or painting over of the lens and generates an alarm to alert.
> Mark ENABLE checkbox to activate the tamper alarm.
> DWELL TIME : Sets the time for the tamper alarm once detected.
> Mark ENABLE checkbox to input the alarm signal from the alarm-in port.
> TYPE : Lets the camera know the type of alarm contacts, NO=Normally Open &
NC=Normally Close.
> DWELL TIME : Sets the time for the alarm once detected by the alarm-in.
●
Tamper
●
Alarm In
Enables to user to set the event trigger optionally.
●
Manual :
• SENSITIVITY : Sets the detection sensitivity for the objects.
• WIDTH : Sets the minimum/maximum sizes in width of the objects to be detected.
• HEIGHT : Sets the minimum/maximum size in height of the objects to be detected.
• SHOW OBJECT SIZE : Shows the reference size of detection object.
