background image

16

(4)  Window Fit: Resizes the live view display to fit along with the display window size.

(5)  Full Screen: Resizes the live view display to fit to the monitor resolution. ESC key 

returns to the previous view.

(6)  Custom: Selects the live view display scale, 0%~200%, by the control bar. 100% is 

the original size. 

PTZ Control

•  Zoom: Controls the lens optical zoom in/out for 

WIDE & TELE.

•  Focus: Adjusts the lens focus manually for NEAR & 

FAR.

•  Push AF: Gets the lens to focus at the push of a 

button.

i

 Note: 

•  ZOOM, FOCUS & PUSH AF are disabled when PTZ 

control is locked.

•  PTZ control can be unlocked at Setup>Video&Im-

age>Image>AF>Lens Locking to OFF or TIMER.

CAUTION: 

•  Set LENS LOCKING at Setup>Video&Image>Im-

age>AF>Lens Locking to ON or TIMER after completing 

lens setting to prevent unwanted lens operation.

•  Do not adjust zoom/focus in low light conditions or night 

mode. It might cause erroneous focusing.

•  For V/F versions, Zoom/Focus operation is strongly rec-

ommended for installation purpose only. Frequent zoom/

focus adjustments can reduce the life span of the lens..

Содержание ICB-72M2713MAA





















































Отзывы: