Eneo GLS-2202H, Инструкция по установке и эксплуатации

Страница: 47 / 68

47
• Change the Application Setting - Alarm Application Enable Setting
Please follow the steps below to change the setting via the network if necessary.
. Click the Enable Alarm button on the left side of the record to enter the „Alarm Application Enable Setting” page.
. Check / uncheck the trigger types of „Enable Alarm – Upload Via FTP”.
3. Check / uncheck the trigger types of „Enable Alarm – Save Into SD Card”.
4. Check / uncheck the trigger types of „Enable Alarm – Upload Via SMTP”.
5. Enter the „Alarm Duration” you have chosen.
6. Click the
Submit button to submit the new setting of the recording.
7. Click the
Home
button to return to the home page.
Description of function keys
Enable Alarm - Upload via FTP: The alarm recording will be upload to the FTP when triggered.
Enable Alarm - Save Into SD Card:
The alarm recording will be saved to the SD card when triggered.
Enable Alarm - Upload via SMTP:
The alarm recording will be upload to the SMTP when triggered.
Alarm Duration:
Predetermines the length of the alarm. This setting will apply in the four channels.