40
41
• Change the Application Setting - ALARM - MOTION DETECTION
Please follow the steps below to enable changes in the motion detection function of the alarm through the network if
and as necessary.
Set the motion detection:
1. Click the
Motion detection
button on the left side of the Alarm to enter the „ALARM - MOTION DETECTION” page.
2. Click and drag the mouse across a targeted zone to draw a red rectangle on the image (coordinates provided
below).
3. Click the Save button to save the motion detection range.
4. Enables / disables the motion detection function.
5. Set up the signal level.
6. Click the
Submit
button to submit the new setting of the recording.
7. Click the
Home
button to return to the home page.
Description of function keys:
The targeted zone:
Click and drag the mouse across the targeted zone to draw a red rectangle on the image.
Detection Range:
The red rectangle’s coordinates
Save:
Click to save the motion detection range.
Motion Detection:
This option enables / disables the motion detection function
Sensitivity Level:
Selects any one of the given options for the setup signal level.
Submit:
Click to submit the new setting to the LAN CAMERA.
