INSTALLATION
Vandalproof dome unit
Assembly Screw
(M4x11mm)
Bracket Ring
Mounting Plate
Dome Cover
5. Insert the bracket ring to the mounting plate for waterproofing.
6. Open the dome cover by loosening screws.
7. Connect the power and BNC cables with the camera cables.
8. Assemble the vandalproof dome unit to the mounting plate using the assembly screws (M4x11mm).
9. Set the camera’s viewing angle.
10. Put the dome cover to the dome unit and tighten screws.
* The vandalproof dome is not
included in this package.
eneo® is a registered trademark of
VIDEOR E. Hartig GmbH
Exclusive distribution through specialised
trade channels only.
VIDEOR E. Hartig GmbH
Carl-Zeiss-Straße 8
63322 Rödermark/Germany
Tel. +49 (0) 6074 / 888-0
Fax +49 (0) 6074 / 888-100
www.videor.com
www.eneo-security.com
Technical changes reserved
© Copyright by VIDEOR E. Hartig GmbH
Version 10/2016