eSATA External Storage
V1.0
5
6.
Close the top cover and screw it down.
DVR CONNECTION
The eSATA external storage is connected to the DVR using the closed eSATA cable.
CAUTIONS:
Shut down the DVR system and remove the power cable from the DVR before connecting
the unit.
You must connect and disconnect the power cables in the following order:
–
Connecting: Unit
→
DVR
–
Removing: DVR
→
Unit
1.
Connect one end of the eSATA cable to the eSATA port on the rear panel of the storage unit and the
other end to the eSATA port on the rear panel of the DVR.
2.
Connect the power cord to the storage unit and to the power outlet and turn on the power switch on the
rear panel of the storage unit.
3.
Connect the DVR power cord and turn on the DVR system.
CAUTION: Make certain that storage unit’s power switch is turned on before turning on
the DVR system.
4.
LEDs on the front and rear panels of the storage unit are lit.
CAUTION: Do NOT remove the eSATA cable while the unit or DVR is operating, otherwise,
the unit or DVR may not operate correctly.
