Operating Instructions
44
Alarm Reset
Selecting (Alarm Reset) in the Live Monitoring menu resets the DVR’s outputs including the internal buzzer during
an alarm. It is the same as pressing the
ALARM
button.
Panic
Selecting (Panic) in the Live Monitoring menu starts panic recording of all cameras, and selecting again stops
panic recording. It is the same as pressing the
PANIC
button.
Setup
Selecting (Setup) in the Live Monitoring menu enters the Main Setup screen. Refer to
Chapter 3
─
Configuration
for detailed descriptions of system setup.
Search Mode
Selecting (Search Mode) in the Live Monitoring menu exits the live monitoring mode and enters the search mode.
It is the same as pressing the
PLAYBACK
button.
Login/Logout
Selecting (Login) in the Live Monitoring menu accesses the Login screen, and you will be asked to select a User
and enter the password to log into the system. Selecting (Logout) in the Live Monitoring menu displays the Logout
screen asking you to confirm whether or not you want to log out the current user
.
Active Cameo Mode
You can enter the Active Cameo mode by pressing and holding the
CAMEO
button for three seconds or longer in any
multi-view format. The yellow outline surrounding the video indicates the active cameo, and pressing the arrow buttons
moves the active cameo. Pressing the (Play/Pause) button exits the Active Cameo mode. Selecting
Exit Group
Edit
in the cameo menu displayed when pressing the
CAMEO
button also exits the Active Cameo mode. The active
cameo mode will remains in effect for 15 seconds if there is no further operation.
In active cameo mode, press the button for the camera you want to display in the active cameo. After setting the camera
number to active cameo, the DVR moves the active cameo to the next cameo. When the camera number exists on the
current screen, the active cameo is changed with the existing camera number. When the camera number does not exist
on the current screen, the active cameo is replaced by the camera number. You can change the screen layout in this way.
Zoom Mode
You can enlarge an area of the video by pressing the
ZOOM
button. For a few seconds after pressing the
ZOOM
button,
a rectangle displays on the screen. A rectangle shows the area that will be enlarged. You can move the rectangle around
using the arrow buttons. Pressing the (Play/Pause) button in the Zoom mode enlarges the area in rectangle. Exit
the Zoom mode by pressing the
ZOOM
button. While in the Zoom mode, the icon displays if
Zoom
is selected in
the Display setup screen (OSD tab).
PTZ Mode
If a user who has
PTZ Control
authority logs into the system, the user can control PTZ cameras. The DVR will control
cameras with Pan, Tilt and Zoom capabilities. Press and hold the
PTZ
button for three seconds or longer to display
the PTZ camera menu and enter the PTZ mode, and press the button again to exit the PTZ mode.
Select the PTZ camera you wish to control by selecting it from the menu. The icon
displays on the PTZ camera
screen.