5
Please press the
SETUP
button when all the settings are complete.
NOTE
The maximum strong magnification in low light level movement situations can be adjusted by pressing the
SETUP button in „AUTO” mode (x2 ~ x128).
As the magnification increases, the screen gets brighter, however the after image also increases.
If storage magnification is increased while SENS UP is operating, it may cause noise, and spots may appear,
however this is normal.
7.2.7 SPECIAL
• CAMERA ID
NOTE: If „Off” is selected, the ID does not appear on the monitor even if it has been input.
Up to 5 letters can be used for the ID.
. Please move the cursor to the letter you wish to choose by using the
UP
and
DOWN
button.
. Select an ID from A, B ~ Y, Z; a, b ~ y, z; 0, ~ 8, 9 by using the
UP
,
DOWN
,
LEFT
and
RIGHT
buttons.
3. Please lock in the letters by using the
SETUP
button.
When the letter is locked in,the cursor moves to the next space.
4. Please repeat the above to input the ID.
NOTE
If the wrong name has been input:
If you press the SETUP button after moving the cursor to CLR, all the letters will be erased.
If you want to correct a letter, please move the cursor to the arrow at the bottom left of the screen and
press „SET”. Please position the cursor above the letter you wish to correct, and then move the cursor
onto the letter you wish to choose and press the SETUP button.
When a name has been choosen, please select a position for the name display.
. Please move the cursor onto „POS” and then press the
SETUP
button.
. The name will appear at the top left corner.
3. Please find the position you wish to display the name by using the 4 directional buttons, and press the
SETUP
button.
• COLOR
AUTO: This camera has a function which automatically changes to the appropriate mode for daytime or night-time.
The
COLOR
mode is operated daytime, and it converts to
BW
mode for night-time.
ON: The
COLOR
mode is selected by default, and the modes do not change automatically.
NOTE
When the AGC is turned off, COLOR does not operate.
When an infrared light is used, there may be a prblem with focussing.