Eneo 221890, Руководство пользователя, Страница: 47 / 80

47
Enter the [QoS Management] - [DSCP QoS] menu bar. On the DSCP QoS page, you can
enable DSCP or disable this function, set DSCP ID range and DSCP priority, click <Configure>
to modify settings and set DSCP Click the <Save> button at the bottom of the page to save
the configuration.
The interface items are as follows:
Interface item description
DSCP QoS
Configuration
to enter the DSCP configuration page and select <Disable> to disable
this function.
Note: The following parameter settings can be set only if DSCP function
is enabled.
DSCP ID Range Enter the DSCP ID that needs to be configured. You can enter one or a
group of IDs. If you set an ID, enter the corresponding ID number in the
DSCP ID range. If you set a ID, you can use "," or "-" to separate it.
"," Used to set a group of non-continuous identification, such as 1,3,5.
"-" is used to set a group of consecutive identifiers, such as 1-6.
Configurable when selecting DSCP.
DSCP Priority Configure the DSCP priority queue, which can be configured when
DSCP is selected.
In the [DSCP QoS] page, you can view the configuration of DSCP QoS. The interface items
are as follows:
Interface item description