7
EN
DIP Switch 1
⇓
(CVBS OUT)
②
IN/OUT connector setting as CVBS mode
IN
Input1
1080p@30
IN / OUT
CVBS
NTSC Underscan 20%
HDMI / VGA OUT
Output
1080p@60
Button for underscan adjustment, press
◄
decrease CVBS OUT underscan, press
►
en-
large CVBS OUT underscan
CVBS underscan adjustment is to avoid overscan situation on CRT screen (Overscan is the
situation in which not all of a televised image is present on a viewing screen) which cause
picture enlarge and could not see the edge of screen. The reduce screen adjustment
range could be from minimum 0% up to 20% based on each time 2% reduced.
When press
◄►
two buttons at same time to switch CVBS output mode as 16:9 or 4:3
When HDMI/VGA output resolution setting on 480p, 720@60, 1080i@60, 1080p@60,
CVBS output is NTSC
When HDMI/VGA output resolution setting on 576p, 720p@50,1080i@50,
1080p@50, CVBS output is PAL
DIP Switch 2 : INPUT/OUTPUT Mode Selection
DIP Switch 2
⇑
(Output Mode)
②
IN/OUT connector setting as output mode,
②
IN/OUT connector function
followed by DIP Switch 1 selection.
DIP Switch 2
⇓
(Input Mode)
②
IN/OUT connector setting as input mode,
②
IN/OUT connector function as
input 2, DIP Switch 1 setting will be ignored.
IN
*Input1
1080p@30
IN / OUT
Input2
720p@30
HDMI / VGA OUT
Output
1080p@60
* Current input display