www.eneltec-led.com
Remote Control Instruction:
1
[ON]
/
[OFF]
Buttons to switch the unit on or off.
2 Brightness control.
3 Colour selection buttons.
Use the
[W]
button for white light,
[R]
,
[G]
or
[B]
button for the basic colours red, green and blue,
the coloured buttons to directly select a mixed colour.
4
[FLASH]
Automatic change of all colours.
5
[STROBE]
No function.
6
[FADE]
Fast automatic change of all colours with blending effect.
7
[SMOOTH]
Slow automatic change of all colours with blending effect.
Inserting the battery into the
remote control
The IR sensor for the remote control signals is firmly connected to the device with a
separate cable. Set up the receiver in such a way that there are no interfering objects
between remote and receiver.
Establish all connections as long as the unit is switched off. Use the shortest possible
high-quality cables for all connections.
Press the lock of the battery holder to the centre of the housing and pull out the battery
holder like a drawer. Insert the battery. The battery is correct if the positive pole points
to the housing base of the remote control. Slide the battery holder back into the remote
until it clicks into place.
When shipping, the battery is already installed in the remote and protected against
discharge by a transparent plastic foil. Remove the plastic foil prior to first use.
