Enecsys Single Repeater, Руководство пользователя

Страница: 5 / 25

Single Repeater Installation Manual Intelligent Reliable Power
1
© ENECSYS 2010. All rights reserved.
1. Introduction
Your solar PV (photo-voltaic) installation when combined with an Enecsys Micro-Inverter, with its
in-built antenna, is able to communicate wirelessly with the Enecsys Gateway. This allows for
comprehensive monitoring of the solar PV array, module-by-module.
Monitoring an array module by module enables the user to see energy generation at module
level. Monitoring also allows the end-user to see the performance of any module at any time of
the day.
An Enecsys Repeater acts as a bridge between the Micro-inverter and the Gateway in situations
where a sufficient communication link cannot be established.
For circumstances where it may be necessary to install an Enecsys Repeater see See“When to
install an Enecsys Repeater” on page 5.
This manual contains information specific to the installation and configuration of the Enecsys
Repeater. Although the installation and configuration is simple a basic knowledge of internet
routers, wired or wireless may be beneficial although not necessary.
Installation of the Enecsys Repeater is a 'plug and play' process. Enecsys have designed the
hardware to be a simple as possible for the installer and end-user alike.