3
Ultimate Lite Astragal Reversibility Instructions
If the holes on the bolt do not align with the holes in the astragal body, adjust the location of the bolt sleeve and/or the finger notch housing to
align the holes and then insert the orange securing pins. The bolt sleeve may be up to 1/4" inset from the end of the astragal.
Insert pins into holes that
align through body
Bolt can be up to
<1/4" inset.
Slide bolt sleeve
towards inside the
astragal
Slide finger notch housing
towards outside of astragal
STEP 3 (CONT.): REINSTALL THE UPPER BOLT
STEP 4: REINSTALL THE LOWER BOLT
!
Do not remove or damage the bottom pad
Flush
with
Bottom
Pad
b.
Before replacing the lower bolt, remove the
existing back pad and place a new one mirroring
the original pad.
a.
Reinstall the lower trim cap on to the
astragal.
Bottom
Pad
Back
Pad
c.
With the bolt in the unlocked position,
slide the lower bolt back into the astragal.
