6
Ultimate Flip Lever
™
Astragal Cut Down Instructions
STEP 4: REINSTALL THE FLIP LEVER ASSEMBLY (ONLY IF INDEX NUMBER IS GREATER THAN 4)
c.
Slide the upper drive bar into the astragal body
a.
Reinstall the lower drive back into the astragal
body.
b.
Reinstall the lower bolt into the astragal body,
connecting the lower drive lug into the lower
drive bar.
d
. Subtract 4 from your index number determined
in Step 1a. Slide the upper drive channel down an
equivalent number of notches so that a new notch
lines up with the marks previously made.
Example:
If your index number was 6, slide the upper drive
channel down 2 notches because 6-4=2.
New notch aligns with mark
f
. Insert the flip lever assembly into the astragal
body, ensuring the flip lever lugs align with the
marks made on the astragal body. Ensure the flip
lever assembly sits flush in the body with the lugs
securely inserted in the notches.
Do not operate the flip lever until the
screw is reinserted.
!
e
. Align the flip lever assembly with the astragal
body so that the handle arm points towards the
bottom of the astragal.
Handle of Flip Lever Assembly is
towards bottom of astragal
Top of
Astragal
Bottom of
Astragal
