Introduction
Thank you for purchasing an ENDURA™ TWC1, Single Unit Rapid Charger.
This high quality product is designed for use with rechargeable LMR batteries.
With the appropriate charging pod installed, it can charge batteries with:
Lithium ion (Li-Ion), nickel metal hydride (NiMH), or nickel cadmium
(NiCd) chemistry.
For a complete list of charging pods available for this charger, contact your
Power Products dealer or call customer service at 800-529-1618.
Important
Read all Caution statements below and this User Manual before attempt-
ing to charge a battery.
Check to make sure a charging pod compatible with your battery is prop-
erly installed on charger before placing battery in pod.
Position charger away from TVs, radios, or other receivers to prevent the
charger from interfering with these types of products.
Always charge new batteries completely before initial use. Recycle bat-
teries when they can no longer be used. Do not discard unwanted batter-
ies in the trash or incinerate. Batteries exposed to fire or excessive heat
may explode.
For best battery performance, charge NiCd and NiMH batteries when they
are fully discharged.
■
1.
2.
3.
4.
5.
