Endura ENLC52HC, Руководство оператора, Страница: 16 / 28

11
www.uniquip.ca
Contents List
Prior to setting up the ENLC52HC Professional
Lawn Comber, check that the following items
are enclosed:
Item Quantity Check if enclosed
ENLC52HC Endura Professional Lawn Comber Unit 1 ____Yes ____No
ENLC52HC Endura Professional Lawn Comber Unit
Handle & Clutch Handle (ENLC52-03 & ENLC52-01)
1 ____Yes ____No
Uniquip ENLC52HC Endura Professional Lawn Comber
Operator’s Manual
1 ____Yes ____No
Original Engine Manufacturer’s Manual 1 ____Yes ____No
If any of these items are missing, please contact 1-888-332-4012 and ask for the Service Manager at Uniquip Canada Inc.
at once.
DO NOT ATTEMPT ASSEMBLY OR OPERATION WITHOUT ANY OF THESE LISTED PARTS!
Setting Up the ENLC52HC Lawn Comber
1. Cut away and remove box from lawn comber.
a. The Lawn Comber is a heavy unit. DO NOT ATTEMPT TO MANUALLY LIFT FROM BOX ALONE!
2. Fold handle into upright position.
3. Verify that all bolts are tightened to secure handle to unit.
4. Attach clutch cable to handle.
5. Ensure that clutch cable is connected correctly by testing the clutch spring. It should stretch from ¾” (1.9 cm) to
1” (2.54 cm) maximum and releases easily.
6. Check engine to ensure that it is filled with oil.
7. Verify with Engine Manufacturer’s Manual for any further procedures to prepare engine for use.
Before using the Endura ENLC52HC Professional Lawn Comber, please perform the following procedures for the
personal and property safety of the operator and jobsite and for optimal performance.
1. Before operating the lawn comber ensure that it is structurally and mechanically safe by checking the following:
a. Perform a detailed visual inspection on the machine with particular attention to the following:
i. Are there any loose, worn or damaged parts? If so, DO NOT ATTEMPT TO OPERATE THE
MACHINE. Make note of required parts, and contact Uniquip Canada for replacement parts
and further assistance to service the unit PRIOR to any further use.
ii. Is the machine, particularly the flails and rotor, clean and free of debris? Small rocks and other
foreign objects can jam machine and cause the unit to malfunction, leading to serious injury to
the operator and property damage on the jobsite.
iii. Are there any cracks or damage on the engine? Consult with the engine manufacturer’s
manual for guidelines and instructions on service. DO NOT ATTEMPT TO OPERATE THE
MACHINE until engine is refurbished to engine factory standards.
Pre-Operation Procedures
MAKE sure that BOTH people lifting the machine are
capable of lifting at least 100 lbs/45.36 kgs individually!!
NEVER ATTEMPT TO LIFT THE MACHINE WITH ONLY
ONE PERSON!!