Endress+Hauser Waterpilot FMX11, Руководство по эксплуатации

Страница: 8 / 28

Basic safety instructions Waterpilot FMX11
8 Hauser
Repairs
To ensure continued operational safety and reliability,
‣
Carry out repairs on the device only if they are expressly permitted.
‣
Observe federal/national regulations pertaining to repair of an electrical device.
‣
Use original spare parts and accessories from Hauser only.
Hazardous area
To eliminate danger to persons or the facility when the device is used in the approval-
related area (e.g. explosion protection, pressure vessel safety):
‣
Check the nameplate to verify if the device ordered can be put to its intended use in the
approval-related area.
‣
Observe the specifications in the separate supplementary documentation that is an
integral part of these Instructions.
2.5 Product safety
This measuring device is designed in accordance with good engineering practice to meet
state-of-the-art safety requirements, has been tested, and left the factory in a condition in
which it is safe to operate.
It meets general safety standards and legal requirements. It also complies with the EC
directives listed in the device-specific EC Declaration of Conformity. Hauser
confirms this by affixing the CE mark to the device.