TTR31, TTR35
Operation
Hauser
13
5.1.4
Output setting
• Hysteresis function
The hysteresis function enables two-point control via a hysteresis. Depending on the temper-
ature T, the hysteresis can be set via the switch point SP and the switch-back point
RSP.
• Window function
The window function enables the monitoring of a process temperature range.
• NO contact or NC contact
This switch function is freely selectable.
• Factory setting (if no customer-specific settings have been ordered):
Switch point SP 1: 45 %; Switch-back point RSP 1: 44.5 %
Switch point SP 2: 55 %; Switch-back point RSP 2: 54.5 %
• Range of adjustment
LRL = Lower Range Limit
URL = Upper Range Limit
LRV = Lower Range Value
URV = Upper Range Value
T09-TTR31xxx-05-xx-xx-xx-001
Fig. 9:
m
Hysteresis function,
n
Window function,
o
NO contact switch status ,
p
NC contact switch sta-
tus SP Switch point; RSP Switch-back point
