Endress+Hauser Teqwave T, Руководство по эксплуатации

Страница: 7 / 54

Teqwave T Basic safety instructions
Hauser 7
2.4 Operational safety
Risk of injury
‣
Operate the measuring device only if it is in proper technical condition, free from errors
and faults.
‣
The operator is responsible for the trouble-free operation of the device.
2.5 Product safety
This measuring device is designed in accordance with good engineering practice to meet
state-of-the-art safety requirements, has been tested, and left the factory in a condition in
which it is safe to operate. It meets general safety standards and legal requirements. It also
complies with the EC directives listed in the device-specific EC Declaration of Conformity.
Hauser confirms this by affixing the CE mark to the device.
2.6 IT security
We only provide a warranty if the measuring device is installed and used as described in the
Operating Instructions.
IT security measures, which provide additional protection for the measuring device and
device data transfer, must be implemented by the operators themselves in line with their
security standards.
Spread of malicious software
The computer recognizes the transmitter as a mass storage medium. Because of this, mal-
ware that may be on the computer can potentially spread.
‣
Ensure suitable security measures are taken, such as the use of anti-virus software.
NOTICE