Endress+Hauser Stamolys CA71NO, Руководство по эксплуатации

Страница: 20 / 56

Operation
20
5 Operation
5.1 Operation and commissioning
The following chapters provide you with information on the analyser's operating elements and
explain how to make settings.
In chapter “Commissioning” you will find the procedure for initial start-up and for daily analyser
operation.
5.2 Display and operating elements
a0001679
Fig. 16: Display and operating elements
1 LED (measured value)
2 LC display (measured value and status)
3 Serial interface RS 232
4 Operating keys and control LEDs
5.3 Local operation
The operating keys and the integrated indicator LEDs have the following functions:
RS 232
M CE E K
1 2
4 3
Key Key function Indicator LED function
H
– “Auto measuring” option
– back to the main menu from all sub-menus Alarm value 1 exceeded
K
– backwards in the sub-menu
(horizontal, see Appendix,)
Alarm value 2 exceeded
V
– backwards in the main menu (vertical)
– increase value Measuring range exceeded
W
– forwards in the main menu (vertical)
– reduce value Measuring range undershot
F
– select option
– adopt value, forwards in the sub-menu (horizontal) Retrieve error message
J
– selection in the sub-menu Unassigned