Endress+Hauser SOP300, Краткое руководство по эксплуатации

Страница: 15 / 32

Overfill Prevention System SOP300 Installation
Hauser 15
L
CAUTION
Leaking battery fluid!
Leaking battery fluid can cause skin lesions and poisoning.
‣
Avoid contact with leaking battery fluid.
‣
Do not inhale battery fluid vapors.
‣
Replace faulty batteries immediately.
5.1.1 Control cabinet
The following conditions must be met:
• Dry and air-conditioned indoor area
• Non-hazardous area
• Ambient temperature: 5 to 30 °C
• Humidity: maximum 85 %
5.1.2 Field signalization (cables and components)
The following conditions must be met:
• Non-hazardous area
• Ambient temperature: –25 to 55 °C
• Humidity: maximum 90%
• The strobe light and alarm siren must be protected from direct sunlight
5.2 Mounting the control cabinet
L
CAUTION
Loose wires!
Loose wires can cause people to trip, slip or fall.
‣
Always lay cables into and out of the control cabinet correctly, e.g. in cable ducts.
The cable entries are located on the bottom of all control cabinets.
5.2.1 Control cabinet for wall mounting
L
WARNING
The control cabinet can fall down if it is not installed correctly!
Danger of crushing!
‣
Mount the control cabinet on a stable wall using all the cabinet holders.
‣
The wall must be designed to hold the weight of the cabinet.
‣
The securing screws must be designed to hold the weight of the cabinet.
‣
Ensure that all the securing screws are securely tightened.
‣
Observe the mounting instructions and technical aids.