background image

About this document

Smart System for Aquacultures SSP200B

6

Hauser

1.4  

Acronyms used

Acronyms

Meaning

AC

Alternating Current

CAS40D

Hauser ammonium and nitrate sensor

CM444

Hauser transmitter

COS51D (only SSP200B for salt water
applications)

Hauser oxygen sensor

COS61D (only SSP200B for freshwater
applications)

Hauser oxygen sensor

CYA112

Hauser immersion assembly

CYK10

Hauser measuring cable

CPU

Central Processing Unit

DC

Direct Current

SSP

Smart System Package

Rest JSON API

Specification for REST-compliant API (Application Programmable
Interface) (REST = Representational State Transfer)

1.5  

Documentation

The Operating Instructions for the Smart System are included in the delivery.

Supplementary documentation for SSP Smart Systems and system components

System or system components

Designation

Documentation

Smart System for Surface Water

SSP100B

• Technical Information TI01550S/04/EN
• Operating Instructions BA02044S/04/EN

Smart System for Aquacultures

SSP200B

• Technical Information TI01551S/04/EN
• Operating Instructions BA02045S/04/EN

Modbus Edge Device

SGC400

Technical Information TI01422S/04/EN

Transmitter

Liquiline CM444 • Technical Information TI00444C/07/EN

• Brief Operating Instructions KA01159C/07/EN
• Operating Instructions BA00444C/07/EN
• Installation Instructions EA00009C/07/A2

Ammonium and nitrate sensor

ISEmax CAS40D • Technical Information TI00491C/07/EN

• Operating Instructions BA00491C/07/EN

Oxygen sensor (for SSP200B for salt
water applications)

Oxymax COS51D • Technical Information TI00413C/07/EN

• Brief Operating Instructions KA00413C/07/EN
• Operating Instructions BA00413C/07/EN

Oxygen sensor (for SSP200B for
freshwater applications)

Oxymax COS61D • Technical Information TI00387C/07/EN

• Brief Operating Instructions KA01133C/07/EN
• Operating Instructions BA00460C/07/EN

Immersion assembly

Flexdip CYA112 • Technical Information TI00118C/07/EN

• Operating Instructions BA00118C/07/A2

Measuring cables

CYK10

• Technical Information TI00432C/07/EN
• Operating Instructions BA00432C/07/EN

For additional documentation, please refer to the Hauser Operations App or

go to 

www.endress.com/device-viewer

.

Содержание Smart System SSP200B





































Отзывы: