RIA16
Installation
Hauser
9
4.3.2
Pipe mounting
The mounting bracket is suited for pipes with a diameter between 25.4…127 mm(1…5 in.). The
mounting kit consists of a mounting plate (item 1), 2 clamps (item 2) and 4 screws (item 3)
(
To install the field indicator on a pipe, proceed as follows:
a0011269
Fig. 3:
Mounting the field indicator on a pipe with mounting bracket, steps a-b
a0011270
Fig. 4:
Mounting the field indicator on a pipe with mounting bracket, steps c-d
Mounting kit, consisting of:
1:
Mounting plate
2:
Clamps for pipe mounting
3:
4 screws
4.4
Post-installation check
After installing the device, always run the following final checks:
Device condition and specifications
Notes
Is the device damaged?
Visual check
Is the sealing ring undamaged?
Visual check
Is the device fixed securely to the wall or mounting plate?
-
Is the front cover fixed tightly?
-
Does the device comply with the measurement point
specifications, such as ambient temperature, measurement
range etc.?
See Section 'Technical data'
